Javascript Menu by Deluxe-Menu.com
Smart Sonic Corp Logo
. . . improving print yields!


AUTOMATIC STENCIL CLEANERS

Model 6000 Stencil & Pallet Cleaner The Model 6000 Stencil & Pallet Cleaner is the "work horse" of the Smart Sonic Line of ultrasonic stencil cleaners. The Model 6000 is fully automatic and programmable. The operator simply places the stencil in the carrier basket and selects the desired cleaning profile. A 29" (740 mm) stencil can be washed and rinsed in less than 2 minutes! The Model 6000 is a modular design and can be configured with a second ultrasonic wash tank for cleaning other applications such as post solder flux from pallets, oven radiators and/or SMD adhesives. Or, the module may be configured with an automatic temperature controlled dryer. The Model 6000 is recommended for users requiring rapid cycle time for cleaning more than 20 stencils per day, automatic drying, or for cleaning multiple applications in the same machine.

Data Sheet       Video




ErgoSonic Model Stencil & Pallet Cleaner The ErgoSonic Model Stencil & Pallet Cleaner is fully automatic and programmable. The operator loads the stencil into an empty chamber and selects the desired cleaning profile. The wash solution is uploaded to the wash chamber from a built-in reservoir and down loaded through a filtration system to the same reservoir after the wash cycle. The stencil is then spray rinsed and the cycle is complete. The total wash / rinse cycle time is approximately 10 minutes. The stencil is then removed and placed in the optional drying rack. Stencils are heat-sensitive and should NOT be dried using elevated temperatures. The ErgoSonic Stencil Cleaner is recommended for users desiring full automation and cleaning less than 20 stencils and/or pallets per day.

Data Sheet       Video




.
SEMI-AUTOMATIC STENCIL CLEANERS

It is important to note that Smart Sonic's semi-automatic stencil cleaners (500, 1500 and 2003 series) will clean just as fast and effectively as the fully automatic systems. This is because the process remains the same. The automatic and semi-automatic systems use the same chemistry and ultrasonic technology. While the 6000 and ErgoSonic models offer more automation and convenience, the Semi-automatic models do not sacrifice quality or efficiency.



Model 1500 & 1550 Stencil & Pallet Cleaner The Model 1550 Stencil & Pallet Cleaner is our most popular semi-automatic system. It is designed to clean stencils up to 29" x 29" (740 x 740 mm) and fully equipped with the following integrated options:
  • Heated Wash Tank
  • Filter Recirculator
  • Ultrasonic Timer
  • Parts Basket
  • Wash Tank Cover
  • Hand Held Spray Rinse Assembly
  • Power Drain
  • Quick Kleen Liner
  • Hand Held Air Blow-off
For those not requiring all options, the Model 1500 may be configured with specific options to suit specific applications.

Data Sheet       Video




The Model 2003 Stencil & Pallet Cleaner The Model 2003 Stencil & Pallet Cleaner is a semi-automatic system configured with two ultrasonic wash tanks. This is an excellent machine for users desiring to clean multiple applications in the same machine.

Data Sheet




Models 520 & 529 Stencil & Pallet Cleaners The Models 520 & 529 Stencil & Pallet Cleaners are our most economical cleaning systems. The Model 520 is designed for stencils and pallets up to 20 inches (510 mm) and the Model 529 is designed for cleaning larger stencils up to 29 inches (740 mm) in size. These systems are similar to the Model 1500 except all options are independent components whereas the Model 1500 has an integrated control panel and options are built into the system.

Data Sheet




.
Pallet and Other Post Solder Cleaning Applications

All Smart Sonic Stencil Cleaners listed above are designed to also clean post solder flux residue from pallets, oven radiators, wave solder fingers and other flux-contaminated tooling used in PCB assembly.

Permali, the makers of Durostone pallet material, recommends only Smart Sonic for ultrasonic applications of cleaning Durostone pallets. Please refer to the following Permali Technical Data Sheet: Permali Tech Data Sheet

Before and After Palllet

Before and After Radiators
Flux-contaminated oven radiator
before cleaning
After 10-minute wash cycle using a Smart Sonic Model 1550 Stencil Cleaner and a 10% solution of 440-R SMT Detergent.



Return to Top





Smart Sonic Corp Logo
SMART SONIC CORPORATION
837 E. 79 Street · Cleveland, Ohio 44103 · U.S.A.
TEL: +1-818-610-7900 · FAX: +1-216-881-8950
E-mail: smt@smartsonic.com · Web Site: http://www.smartsonic.com


Return to Top

RETURN to Smart Sonic Home Page


 ©2015 Smart Sonic Corporation